ViperOS/build.py

import shutil
import os
import sys
import subprocess
import threading
import glob


# 解析参数
clean = '--noclean' not in sys.argv
kernel_only = '--kernel-only' in sys.argv
noapp = '--noapp' in sys.argv
bootloader = '--bootloader' in sys.argv


# 编译内核
cmd = r'..\..\ViperC\output\viperc.exe --project ./VKernel/project.vpj --clear-cache --rebuild-includes'
if clean:
    cmd += ' --clean'
os.system(cmd)


shutil.copy("VKernel/__vpcbuild__/output/kernel.bin", "./disk/sys/kernel/x86_64/kernel.bin")


# 额外链接一份带符号的 kernel.elf（仅供分析：objdump / nm / readelf 定位崩溃 rip）。
# kernel.bin 是 --oformat binary --strip-all 的裸镜像，无符号表，不便把日志里的
# rip=0x130d45 映射回函数。这里用同一批 .obj + 同一 linker.ld 再链一次（只去掉
# --oformat binary/--strip-all），段布局与 kernel.bin 一致 → ELF 里的地址可直接对上运行镜像。
kernel_elf = "VKernel/__vpcbuild__/output/kernel.elf"
kernel_objs = sorted(glob.glob("VKernel/__vpcbuild__/output/*/*.obj"))
if kernel_objs:
    print(f"[build] linking {kernel_elf} for analysis ({len(kernel_objs)} objects)...")
    link_rc = subprocess.call(["ld.lld.exe", "-m", "elf_x86_64", "-T", "VKernel/linker.ld", "-o", kernel_elf] + kernel_objs)
    if link_rc != 0:
        print("[build] 警告: kernel.elf 链接失败（不影响 kernel.bin）")
else:
    print("[build] 警告: 未找到 kernel 目标文件，跳过 kernel.elf")


# --noapp 优先级高于 --kernel-only：只编译内核，不编译所有库和应用
if noapp:
    print("[build] --noapp: 跳过所有库与应用编译，复用已有缓存文件")
    # 检查必要文件是否存在
    required_libs = [
        ("Libs/SerialLogger/__vpcbuild__/output/slog.so", "./disk/libs/slog.so"),
        ("Libs/VPUI64/__vpcbuild__/output/vpui64.so", "./disk/libs/vpui64.so"),
    ]
    required_apps = [
        ("Apps/HelloWorld/__vpcbuild__/output/helloworld.elf", "./disk/apps/hello.elf"),
        ("Apps/Terminal/__vpcbuild__/output/terminal.elf", "./disk/apps/terminal.elf"),
        ("Apps/Gargantua/__vpcbuild__/output/gargantua.elf", "./disk/apps/gargantua.elf"),
        ("Apps/Scene3D/__vpcbuild__/output/scene3d.elf", "./disk/apps/scene3d.elf"),
    ]
    os.makedirs("./disk/apps", exist_ok=True)
    os.makedirs("./disk/libs", exist_ok=True)
    for src, dst in required_libs + required_apps:
        if os.path.exists(src):
            shutil.copy(src, dst)
        else:
            print(f"[build] 警告: {src} 不存在，请先完整构建一次")
elif kernel_only:
    # 仅 --kernel-only：只跳过应用，不跳过库（原有逻辑保留）
    print("[build] --kernel-only: 跳过其他应用和库的编译")
    if not os.path.exists("./disk/apps/hello.elf"):
        print("[build] 警告: hello.elf 不存在，请先不带 --kernel-only 完整构建一次")
else:
    # 完整编译所有库+应用
    so_cmd = r'..\..\ViperC\output\viperc.exe --project Libs/SerialLogger/project.vpj --clear-cache'
    if clean:
        so_cmd += ' --clean'
    os.system(so_cmd)

    vpui_cmd = r'..\..\ViperC\output\viperc.exe --project Libs/VPUI64/project.vpj --clear-cache'
    if clean:
        vpui_cmd += ' --clean'
    os.system(vpui_cmd)

    app_cmd = r'..\..\ViperC\output\viperc.exe --project Apps/HelloWorld/project.vpj --clear-cache'
    if clean:
        app_cmd += ' --clean'
    os.system(app_cmd)

    os.makedirs("./disk/apps", exist_ok=True)
    shutil.copy("Apps/HelloWorld/__vpcbuild__/output/helloworld.elf", "./disk/apps/hello.elf")

    term_cmd = r'..\..\ViperC\output\viperc.exe --project Apps/Terminal/project.vpj --clear-cache'
    if clean:
        term_cmd += ' --clean'
    os.system(term_cmd)

    shutil.copy("Apps/Terminal/__vpcbuild__/output/terminal.elf", "./disk/apps/terminal.elf")

    garg_cmd = r'..\..\ViperC\output\viperc.exe --project Apps/Gargantua/project.vpj --clear-cache'
    if clean:
        garg_cmd += ' --clean'
    os.system(garg_cmd)

    shutil.copy("Apps/Gargantua/__vpcbuild__/output/gargantua.elf", "./disk/apps/gargantua.elf")

    scene3d_cmd = r'..\..\ViperC\output\viperc.exe --project Apps/Scene3D/project.vpj --clear-cache'
    if clean:
        scene3d_cmd += ' --clean'
    os.system(scene3d_cmd)

    shutil.copy("Apps/Scene3D/__vpcbuild__/output/scene3d.elf", "./disk/apps/scene3d.elf")

    os.makedirs("./disk/libs", exist_ok=True)
    so_path = os.path.abspath("Libs/SerialLogger/__vpcbuild__/output/slog.so")
    vpui_path = os.path.abspath("Libs/VPUI64/__vpcbuild__/output/vpui64.so")
    if os.path.exists(so_path):
        shutil.copy(so_path, "./disk/libs/slog.so")
    if os.path.exists(vpui_path):
        shutil.copy(vpui_path, "./disk/libs/vpui64.so")


# 编译 bootloader（GNU-EFI：MSYS make → WSL Ubuntu）；
# bootx64.efi 不由 viperc 产出，容易忘记重编而一直用旧引导器（改了 boot.c / 内核预留逻辑
# 却仍在用旧件）。显式传 --bootloader 才重编；未传时若 boot.c 比产物新则给出提醒。
boot_src = "boot/boot.c"
boot_out = "disk/EFI/BOOT/bootx64.efi"
if bootloader:
    print("[build] building bootloader (make -C boot)...")
    boot_rc = os.system('make -C boot')
    if boot_rc != 0:
        print("[build] 警告: bootloader 构建失败（需 MSYS make + WSL Ubuntu + _UNCADK/tools/gnu-efi）")
elif os.path.exists(boot_src) and os.path.exists(boot_out) and os.path.getmtime(boot_src) > os.path.getmtime(boot_out):
    print("[build] 警告: boot/boot.c 比 disk/EFI/BOOT/bootx64.efi 新 → bootloader 已过期，请用 --bootloader 重编")


os.system('powershell -ExecutionPolicy Bypass -File ./Scripts/disk.ps1')


serial_log = os.path.abspath("serial.log")
if os.path.exists(serial_log):
    os.remove(serial_log)


print(f"[build] CWD: {os.getcwd()}")
print(f"[build] serial_log: {serial_log}")


qemu_cmd = [
    'qemu-system-x86_64',
    '-pflash', r'D:\msys64\mingw64\share\qemu\edk2-x86_64-code.fd',
    '-drive', 'file=disk.img,format=raw,if=ide',
    '-m', '256m',
    '-vga', 'std',
    '-usb',
    '-device', 'usb-kbd',
    '-device', 'usb-mouse',
    '-accel', 'tcg,tb-size=128',
    '-serial', f'file:{serial_log}',
    '-no-reboot'
]


print(f"[build] QEMU cmd: {' '.join(qemu_cmd)}")


proc = subprocess.Popen(qemu_cmd)
proc.wait()


print(f"[build] serial_log path: {serial_log}")
print(f"[build] file exists: {os.path.exists(serial_log)}")
if os.path.exists(serial_log):
    with open(serial_log, "r", encoding="utf-8", errors="replace") as f:
        content = f.read()
        print(f"[build] serial_log size: {len(content)} bytes")
        print(content)
else:
    print("[build] serial.log not found!")