TermiNexus
3583f78efc
- 去掉不再需要的 import t, c - class → struct（纯数据聚合） - t.CArray[T, N] → [N]T - static 修饰符移到类型前 - @__attribute(packed) → @__attribute__(packed) - UHCI 中断回调参数改用 callable[[], int] - 同步 CPUID 注释中的旧类型名
146 lines
4.1 KiB
Plaintext
146 lines
4.1 KiB
Plaintext
import asm
|
||
import intr.idt as idt
|
||
import platform.pch.pic as pic
|
||
|
||
|
||
define MOUSE_DATA = 0x60
|
||
define MOUSE_STATUS = 0x64
|
||
define MOUSE_COMMAND = 0x64
|
||
|
||
define MOUSE_BUF_SIZE = 1024
|
||
|
||
define MOUSE_LEFT = 0x01
|
||
define MOUSE_RIGHT = 0x02
|
||
define MOUSE_MIDDLE = 0x04
|
||
|
||
class mouse_packet:
|
||
flags: uint8
|
||
dx: uint8 # 原始幅值字节（符号在 flags.bit4）
|
||
dy: uint8 # 原始幅值字节（符号在 flags.bit5）
|
||
buttons: uint8
|
||
|
||
packets: [MOUSE_BUF_SIZE]mouse_packet
|
||
static pack_head: uint32 = 0
|
||
static pack_tail: uint32 = 0
|
||
static pack_count: uint32 = 0
|
||
static mse_irq_cnt: uint64 = 0
|
||
|
||
static cycle: uint8 = 0
|
||
static byte1: uint8 = 0
|
||
static byte2: uint8 = 0
|
||
static byte3: uint8 = 0
|
||
|
||
static mouse_x: int32 = 0
|
||
static mouse_y: int32 = 0
|
||
static mouse_buttons: uint8 = 0
|
||
|
||
def _wait_read():
|
||
timeout: uint32 = 100000
|
||
for _ in range(timeout, 0, -1):
|
||
if (asm.inb(MOUSE_STATUS) & 0x01) != 0: return
|
||
|
||
def _wait_write():
|
||
timeout: uint32 = 100000
|
||
for _ in range(timeout, 0, -1):
|
||
if (asm.inb(MOUSE_STATUS) & 0x02) == 0: return
|
||
|
||
def _write_cmd(cmd: uint8):
|
||
_wait_write()
|
||
asm.outb(MOUSE_COMMAND, 0xD4)
|
||
_wait_write()
|
||
asm.outb(MOUSE_DATA, cmd)
|
||
_wait_read()
|
||
asm.inb(MOUSE_DATA)
|
||
|
||
def irq_handler() -> int:
|
||
global cycle, byte1, byte2, byte3, pack_tail, pack_count, mse_irq_cnt
|
||
mse_irq_cnt += 1
|
||
status: uint8 = asm.inb(MOUSE_STATUS)
|
||
if (status & 0x20) == 0: return 0
|
||
data: uint8 = asm.inb(MOUSE_DATA)
|
||
if cycle == 0:
|
||
if (data & 0x08) != 0:
|
||
byte1 = data
|
||
cycle = 1
|
||
return 0
|
||
if cycle == 1:
|
||
byte2 = data
|
||
cycle = 2
|
||
return 0
|
||
byte3 = data
|
||
cycle = 0
|
||
# 丢弃带溢出位的包（bit6/bit7 = X/Y overflow）：此时设备给的是饱和值，
|
||
# 直接采用会产生 ±127 级跳变（表现为光标“飞”）。
|
||
if (byte1 & 0xC0) != 0:
|
||
return 0
|
||
if pack_count < MOUSE_BUF_SIZE:
|
||
packets[pack_tail].flags = byte1
|
||
packets[pack_tail].dx = byte2
|
||
packets[pack_tail].dy = byte3
|
||
packets[pack_tail].buttons = byte1 & uint8(0x07)
|
||
pack_tail = pack_tail + 1
|
||
if pack_tail >= MOUSE_BUF_SIZE:
|
||
pack_tail = 0
|
||
pack_count += 1
|
||
return 0
|
||
|
||
def read_packet(out: mouse_packet*) -> int:
|
||
global pack_head, pack_count
|
||
asm.cli()
|
||
if pack_count == 0:
|
||
asm.sti()
|
||
out.flags = 0
|
||
out.dx = 0
|
||
out.dy = 0
|
||
out.buttons = 0
|
||
return -1
|
||
out.flags = packets[pack_head].flags
|
||
out.dx = packets[pack_head].dx
|
||
out.dy = packets[pack_head].dy
|
||
out.buttons = packets[pack_head].buttons
|
||
pack_head = pack_head + 1
|
||
if pack_head >= MOUSE_BUF_SIZE:
|
||
pack_head = 0
|
||
pack_count -= 1
|
||
asm.sti()
|
||
return 0
|
||
|
||
def has_data() -> int:
|
||
return pack_count
|
||
|
||
def get_x() -> int32:
|
||
return mouse_x
|
||
|
||
def get_y() -> int32:
|
||
return mouse_y
|
||
|
||
def get_buttons() -> uint8:
|
||
return mouse_buttons
|
||
|
||
def init():
|
||
_wait_write()
|
||
asm.outb(MOUSE_COMMAND, 0xA8)
|
||
# 读-改-写 CCB 期间屏蔽 IRQ1：与 keyboard.init 同理 —— 0x20 读 CCB 会把 CCB 值放进
|
||
# 0x60 输出缓冲并拉高 IRQ1，键盘 ISR 一旦运行就会把它当扫描码抢走（现场：sc=0x47
|
||
# 正是这里清 bit5 后的 CCB），于是下面的 inb(0x60) 只能拿到残留值 ⇒ 可能把错误 CCB 写回。
|
||
pic.setMask(1)
|
||
_wait_write()
|
||
asm.outb(MOUSE_COMMAND, 0x20)
|
||
_wait_read()
|
||
status: uint8 = asm.inb(MOUSE_DATA)
|
||
status = status | 0x02
|
||
status = status & 0xDF
|
||
_wait_write()
|
||
asm.outb(MOUSE_COMMAND, 0x60)
|
||
_wait_write()
|
||
asm.outb(MOUSE_DATA, status)
|
||
pic.clearMask(1)
|
||
_write_cmd(0xF6)
|
||
# 分辨率设为 8 counts/mm：0xF6(Set Defaults) 会把它重置为最粗的 4 counts/mm，
|
||
# 于是每个计数对应的位移偏大。设细一档后光标更稳、不易“飞”。
|
||
_write_cmd(0xE8)
|
||
_write_cmd(0x03)
|
||
_write_cmd(0xF4)
|
||
pic.clearMask(12)
|
||
idt.irqInstallHandler(12, irq_handler, "mouse")
|